BSF-series connections vary by model and port. Some stirring ports are specified as φ40 or φ50 mm flanges; other ports use threaded fittings, KF connections or clamps. Confirm each connection against the selected model’s port schedule. This page lists what to confirm before ordering. or the glass reactor port sizes
What to Confirm Before Ordering
Documentation: Specify any required certification or conformity documents in your inquiry. Their availability must be confirmed for the quoted configuration. No CE declaration or certificate number is published on this page.
Site requirements: State your cooling-water, vacuum and electrical requirements, and identify any supporting equipment required in the quotation.
What to Tell Us for an Accurate Quote
| Item | What to state |
|---|---|
| Model and capacity | Reactor model, nominal capacity and required batch volume; capacities depend on the selected model. |
| Lid and openings | Lid diameter and the port layout (openings A–H as listed per model) — state any mating-joint requirement. |
| Contact material | Stainless steel grade specified for the selected model; confirm the grade in your inquiry. |
| Jacket circulation | Jacket inlet/outlet circulation connections per model; state your loop requirement. |
| Drive and controller | Motor power, controller features and stirring speed per model. |
| Accessories | Constant-pressure funnel capacity, condenser specification, stirrer rod and paddle type per model; confirm which items are included. |
| Bottom discharge | Discharge valve material and connection per model. |
| Height and layout | Unit height and working dimensions per model; confirm against your installation space. |
| Power supply | State your site voltage and frequency; confirm against the selected model. |
Send these with your inquiry through the contact page; the more complete the list, the closer the first quote lands.
Procurement Questions
Do stainless reactors use the same joint numbering as glass reactors?
Use the selected BSF model’s port schedule. Do not infer compatibility from the joint numbering used for glass reactors.
Ready to spec your unit? Contact UnionClay with the checklist filled in.