Glass Liquid Separator
UnionClay currently lists 2 glass liquid separator models: the Drum Type Vacuum Glass Dispenser 10L-50L and the Spherical Vacuum Glass Dispenser 10L-50L, both built from thickened high borosilicate 3.3 glass with PTFE sealing for vacuum operation. Buyers searching for a liquid separator or a glass liquid liquid extraction unit use this hub to fix a working capacity between 10L and 50L, confirm vacuum support and discharge configuration, and move from browsing to a quotation request.
Glass Liquid Separator Selection Guide
UnionClay glass liquid separator pages are built for procurement teams comparing separator options with model-level product pages, related equipment and quotation support. Both dispensers cover the 10L-50L capacity band, and the category is most relevant for buyers comparing separator volume, vacuum support, stirring, discharge valve and frame configuration.
Common search and AI-discovery terms for this category include glass liquid separator, vacuum glass dispenser, glass liquid separation vessel and laboratory separator. Use this hub to compare the two FY-series dispenser models, confirm process fit and move from product browsing to equipment matching.
Applications
Both the drum type and spherical dispensers are used for vacuum-driven liquid handling in laboratory and pilot settings, typically in one of four roles:
- Liquid separation — splitting or drawing off liquid phases after reaction, washing or extraction steps
- Vacuum feeding — charging liquids into reactors or other vessels under vacuum instead of open pouring
- Process transfer — moving intermediate liquids between stages of a process line
- Laboratory separation — bench and pilot separation work at 10L to 50L working volumes
How to Choose a Glass Liquid Separator
Start with the working capacity within the 10L-50L band, target temperature or vacuum condition, medium compatibility, connection size, voltage, control requirements and the equipment already in the process line. Then compare the Drum Type Vacuum Glass Dispenser 10L-50L against the Spherical Vacuum Glass Dispenser 10L-50L on those points. For quote-first procurement, share process details so UnionClay can recommend a model and matching support equipment.
Featured Models in This Category
The category holds 2 vacuum glass dispenser models, differing mainly in vessel geometry rather than capacity — both are offered in the 10L-50L span:
- Drum Type Vacuum Glass Dispenser 10L-50L — drum-shaped borosilicate 3.3 vessel with PTFE sealing for vacuum operation
- Spherical Vacuum Glass Dispenser 10L-50L — spherical vessel in the same 10L-50L capacity band, also sealed with PTFE for vacuum service
Related Equipment Hubs
Because both dispensers run under vacuum, they are usually specified together with vacuum generation and downstream processing equipment:
Glass Liquid Separator Buyer Decision Map
This category helps buyers move from a broad glass liquid separator search to a practical shortlist of the two dispenser models. The correct choice depends on process role, working scale within 10L-50L, medium, target operating condition, connected equipment and quotation requirements. This section organizes the decision without inventing model-specific values.
The category is most useful for buyers comparing separator volume, vacuum support, stirring, discharge valve and frame configuration across the drum type and spherical designs. Use the category overview to understand the equipment family, then open the related UnionClay model pages to verify published specifications before final selection.
Search Intent and Product Family Terms
Buyers describe the same two FY-series dispensers with several search phrases. Each phrase below maps to one procurement decision — confirm the exact model family on UnionClay category or product pages instead of treating the phrases as different equipment, and leave exact values to the relevant product pages:
- glass liquid separator
- vacuum glass dispenser
- glass liquid separation vessel
- laboratory separator
- glass liquid liquid extraction unit
Application Fit Checklist
Before comparing the two models, decide how the equipment will be used in the process. The same 10L-50L category can support laboratory testing, pilot work or a support role inside a larger process line. For each intended role, confirm the process conditions, connected equipment and model page details before quotation:
- Liquid separation
- Vacuum feeding
- Process transfer
- Laboratory separation
Procurement Parameters to Confirm
A useful quote request for a 10L-50L glass liquid separator should include the process information that affects model selection. The following checks apply across UnionClay process equipment categories and help reduce vague back-and-forth before quotation:
- Working scale — share vessel size, batch size, target capacity or model range when known
- Process condition — confirm temperature, vacuum, flow, stirring, pressure or separation requirements where relevant to the category
- Medium and material — describe the working medium and any compatibility concern; check model pages for published material information such as borosilicate 3.3 glass and PTFE sealing
- Connected equipment — state whether the equipment connects to reactors, chillers, pumps, condensers, filtration units, distillation systems or existing devices
- Site requirements — prepare voltage, space, utility, connector and customization notes before sending the RFQ
Featured Model Review Path
Use this category page for shortlisting and the two model pages for exact published details. If a value is not shown on a model page, confirm it with UnionClay instead of copying values from the other model:
- Drum Type Vacuum Glass Dispenser 10L-50L — open the model page to check published product details before assuming a specification
- Spherical Vacuum Glass Dispenser 10L-50L — verify the published capacity, sealing and vacuum details on the model page rather than inferring them from the drum type version
System Matching Path
A vacuum glass dispenser rarely works alone: it needs a vacuum source and usually sits beside reaction or filtration equipment. Review these related hubs when the process requires temperature control, vacuum support, reaction, filtration, evaporation, distillation or downstream processing together with the 10L-50L separator:
- Vacuum Filtration — matched workflow for solid-liquid processing after separation
- Vacuum Pump — the vacuum source both dispenser models depend on
- Glass Reactor — upstream reaction vessels the separator feeds or receives from
- Contact UnionClay — use the contact page for model selection and quotation support
Specification Review Rules
Customer source sheets cover material and sealing for the FY models, but configuration details still differ between the drum type and spherical versions, so review each model page on its own:
- Use this category page to understand the equipment family and buying questions
- Use model pages to check exact published specifications and images
- Do not assume both models share the same capacity option, operating range, material, power, pump, connection or accessory configuration
- Ask UnionClay to confirm unclear requirements before ordering or writing an internal procurement specification
Comparison Questions for Shortlisting
When both dispenser models or several related categories appear suitable, compare them with the same set of buyer questions. This keeps the purchasing review practical and prevents a decision based only on a category name:
- Process fit — which product family directly supports the main process step, and which products are only support equipment?
- Model fit — which of the two published UnionClay model pages should be opened before requesting a quotation?
- Workflow fit — does the process need matched equipment before or after this category, such as temperature control, vacuum support, condensation, filtration or receiving?
- Procurement risk — which required details are still unknown and should be confirmed before purchase rather than assumed from the other model?
RFQ Preparation Checklist
Before contacting UnionClay, prepare a compact RFQ note. Include application, target capacity within the 10L-50L band, medium, required operating condition, voltage, connected equipment, installation limits and customization needs. A complete note helps UnionClay review the dispenser family and matching support devices together.
Attach any process diagram, existing equipment list, preferred model names — drum type or spherical — or site limitations if available. Even a simple workflow note helps UnionClay understand whether the buyer needs a single 10L-50L separator or a matched equipment group.
Source boundary: customer source sheets list thickened high borosilicate 3.3 glass, PTFE sealing and vacuum operation for FY models.
FAQ
What information should I provide before requesting a quote?
Send the target capacity within the 10L-50L span, working medium, temperature range or vacuum requirement, voltage, connection size, application and any customization needs.
Can UnionClay match this category with other process equipment?
Yes. Around the drum type or spherical dispenser, UnionClay can match reactors, chillers, heating and cooling circulators, vacuum pumps, filtration equipment, rotary evaporators, distillation systems and related support equipment according to the workflow.
Is the content on this category based on real product material?
Yes. Customer source sheets list thickened high borosilicate 3.3 glass, PTFE sealing and vacuum operation for the FY models behind both 10L-50L dispensers.