DLSB-100-30 Non-sealed Recirculating Chiller
DLSB-100-30 Non-sealed Recirculating Chiller
Temperature range: -30℃ to room temperature; Voltage: 380V,50Hz; Total power: 4.8KW; Model: DLSB-100 30 Technical parameters
✓ CE Certified · 1-Year Warranty
✓ 7–15 Day Factory Delivery
✓ OEM / ODM · Export to 40+ Countries
product details
DLSB-100-30 Non-sealed Recirculating Chiller Overview
DLSB-100-30 Non-sealed Recirculating Chiller is listed from the customer-supplied May 27 parameter document. The specification below is translated from the source table/document and should be confirmed against the final quotation configuration.
Parameter Reference
| Model | DLSB-100 30 Technical parameters |
|---|---|
| Type | -30℃ to room temperature |
| Temperature range | -30℃ to room temperature |
| Voltage | 380V,50Hz |
| Total power | 4.8KW |
| Total current | 10A |
| Temperature sensor | PT100 |
| Reservoir volume | 100L |
| Safety protection | over-pressure, delay, over-current, overheat and leakage protection |
| Lift | 35L min,11m LCD display digital button control Display items real-time temperature、 、cooling、circulation inlet/outlet connector specification outer diameter Φ |
| Flow rate | head 35L min,11m LCD display digital button control Display items real-time temperature、 、cooling、circulation inlet/outlet connector specification outer |
Before Quotation
- Confirm model, voltage, target temperature range and matched reactor or process volume.
- Confirm installation environment, cooling mode and utility conditions.
- Request final drawing and configuration sheet before order confirmation.
Content basis: DLSB-100-30.docx from the May 27 Union Clay material folder.
Linked Reference: Non-sealed Recirculating Chiller
The linked reference positions non-sealed chillers as refrigerated circulation equipment for external laboratory and process cooling. In Union Clay pages, this supports DLSB non-sealed model pages where the open circulation route, cooling capacity and target low-temperature point are selected by model.
Use the parameter table on each Union Clay model page for voltage, power, cooling capacity and reservoir data.
DLSB-100-30 Non-sealed Recirculating Chiller Application and Selection Guide
Use DLSB-100-30 Non-sealed Recirculating Chiller when comparing recirculating chiller, laboratory chiller, cooling circulator for controlled cooling support for reactors, condensers, rotary evaporators and temperature-sensitive process equipment. This section brings together source-backed details, system-fit notes, and quote-preparation points so procurement teams can review the model in context.
Use the details below to confirm fit before quotation. The source-backed notes, process-fit guidance, and related equipment links are organized for buyer review.
Source-backed details to review
- Model: DLSB-100 30 Technical parameters
- Temperature range: -30℃ to room temperature
- Type: -30℃ to room temperature
- Voltage: 380V,50Hz
- Total power: 4.8KW
- Total current: 10A
- Temperature sensor: PT100
- Selection basis: Confirm target temperature, cooling capacity at the target point, reservoir volume, pump flow and connection size.
- System matching: This family is commonly matched with reactors, condensers and rotary evaporator cooling loops.
How this model fits into a process system
Use this page to compare the model against nearby UnionClay products, then match it with reactors, chillers, heating and cooling circulators, vacuum pumps, filtration units, rotary evaporators or distillation systems according to the process route. The best choice depends on cooling demand, target temperature, heat load, reservoir volume, pump flow, connection size and ambient conditions.
Before requesting a quote
Share the target capacity, working medium, temperature or vacuum requirement, voltage, connector requirements and any customization needs. UnionClay can use those details for model matching, equipment selection and project quotation support.
This content uses UnionClay customer parameter sheets and the UnionClay selection guide as the basis for temperature-control positioning.
Model Selection and Related Equipment
Compare DLSB-100-30 Non-sealed Recirculating Chiller with related UnionClay equipment when planning laboratory, pilot and chemical process applications. The links below connect the product family, nearby models, compatible support equipment, and the quote path in one place.
Use these links to move through the product-selection path without breaking context: category overview, adjacent models, matched support equipment, and UnionClay quotation.
- View Recirculating Chiller
- Compare with DLSB-50-40 Sealed Recirculating Chiller
- Compare with DLSB-50-30 Sealed Recirculating Chiller
- Compare with DLSB-5-40 Sealed Recirculating Chiller
- Explore Heating and Cooling Integrated Machine
- Explore Glass Reactor
- Match with DFY-50-40 Heating and Cooling Integrated Machine
- Match with Jacketed Glass Reactor
- Request model selection support
Related guides
FAQ for DLSB-100-30 Non-sealed Recirculating Chiller
How do I choose this model?
Choose according to working volume, temperature range, material compatibility, connection requirements, voltage and process conditions. UnionClay can help compare nearby models in the same product series.
Which equipment is commonly used together with this product?
Depending on the process, this product can be matched with reactors, chillers, heating and cooling circulators, vacuum pumps, filtration equipment, rotary evaporators or distillation systems from UnionClay.
Can UnionClay support quotation and model matching?
Yes. Share target capacity, medium, temperature range, vacuum requirement, voltage and application details, and UnionClay will support model selection and quotation.