DLSB-30-30 Sealed Recirculating Chiller
Category
Contact Us
- 24-hour online service
- Own factory processing
DLSB-30-30 Sealed Recirculating Chiller
Temperature range: -30℃ to room temperature; Voltage: 220V,50Hz; Total power: 1.7KW; Model: DLSB-30 30 Technical parameters
product details
DLSB-30-30 Sealed Recirculating Chiller Overview
DLSB-30-30 Sealed Recirculating Chiller is listed from the customer-supplied May 27 parameter document. The specification below is translated from the source table/document and should be confirmed against the final quotation configuration.
Parameter Reference
| Model | DLSB-30 30 Technical parameters |
|---|---|
| Type | sealed type -30℃ to room temperature |
| Temperature range | -30℃ to room temperature |
| Voltage | 220V,50Hz |
| Total power | 1.7KW |
| Total current | 7.5A |
| Temperature sensor | PT100 |
| Expansion tank | 10L |
| Safety protection | over-pressure, delay, over-current, overheat and leakage protection |
| Lift | 20L min,20m LCD display digital button control Display items cooling, circulation, set temperature and real-time temperature inlet/outlet connector specification DN15 circulation hose length 3.8m*1 brake caster quantity 4 leakage protection required yes |
| Flow rate | head 20L min,20m LCD display digital button control Display items cooling, circulation, set temperature and real-time temperature inlet/outlet connector specification DN15 circulation hose length 3.8m*1 brake caster quantity 4 leakage protection required |
Before Quotation
- Confirm model, voltage, target temperature range and matched reactor or process volume.
- Confirm installation environment, cooling mode and utility conditions.
- Request final drawing and configuration sheet before order confirmation.
Content basis: customer technical document from the May 27 Union Clay material folder.
Linked Reference: Sealed Recirculating Chiller
The linked reference positions sealed chillers as closed-loop refrigerated circulation equipment. In Union Clay pages, this supports DLSB sealed model pages where the closed circulation path helps reduce coolant exposure while supplying low-temperature cooling to external equipment.
Use the Union Clay model parameter document for the exact DLSB capacity, temperature range, cooling capacity and pump data.
DLSB-30-30 Sealed Recirculating Chiller Application and Selection Guide
DLSB-30-30 Sealed Recirculating Chiller is positioned for buyers searching for recirculating chiller, laboratory chiller, cooling circulator with clear model-level specifications rather than a generic catalog listing. It is most relevant for controlled cooling support for reactors, condensers, rotary evaporators and temperature-sensitive process equipment.
For SEO and AI search context, the key entity on this page is recirculating chiller from UnionClay, supported by model data, quotation guidance and internal links to related equipment families.
Source-backed details to review
- Model: DLSB-30 30 Technical parameters
- Temperature range: -30℃ to room temperature
- Type: sealed type -30℃ to room temperature
- Voltage: 220V,50Hz
- Total power: 1.7KW
- Total current: 7.5A
- Temperature sensor: PT100
- Selection basis: Confirm target temperature, cooling capacity at the target point, reservoir volume, pump flow and connection size.
- System matching: This family is commonly matched with reactors, condensers and rotary evaporator cooling loops.
How this model fits into a process system
Use this page to compare the model against nearby UnionClay products, then match it with reactors, chillers, heating and cooling circulators, vacuum pumps, filtration units, rotary evaporators or distillation systems according to the process route. The best choice depends on cooling demand, target temperature, heat load, reservoir volume, pump flow, connection size and ambient conditions.
Before requesting a quote
Share the target capacity, working medium, temperature or vacuum requirement, voltage, connector requirements and any customization needs. UnionClay can use those details for model matching, equipment selection and project quotation support.
This content uses UnionClay customer parameter sheets and the UnionClay selection guide as the basis for temperature-control positioning.
Model Selection and Related Equipment
DLSB-30-30 Sealed Recirculating Chiller is listed for buyers comparing recirculating chiller for laboratory, pilot and chemical process applications. Review the model with related UnionClay equipment to match temperature control, reaction, vacuum, filtration or downstream process requirements.
Common search terms for this page include DLSB-30-30 Sealed Recirculating Chiller, recirculating chiller, laboratory chiller, cooling circulator. Buyers can also compare laboratory chiller, cooling circulator, low temperature chiller when selecting capacity, working temperature, connection requirements and process support equipment.
- View Recirculating Chiller
- Compare with DLSB-50-40 Sealed Recirculating Chiller
- Compare with DLSB-50-30 Sealed Recirculating Chiller
- Compare with DLSB-5-40 Sealed Recirculating Chiller
- Explore Heating and Cooling Integrated Machine
- Explore Glass Reactor
- Match with DFY-50-40 Heating and Cooling Integrated Machine
- Match with Jacketed Glass Reactor
- Request a quote from UnionClay
FAQ for DLSB-30-30 Sealed Recirculating Chiller
How do I choose this model?
Choose according to working volume, temperature range, material compatibility, connection requirements, voltage and process conditions. UnionClay can help compare nearby models in the same product series.
Which equipment is commonly used together with this product?
Depending on the process, this product can be matched with reactors, chillers, heating and cooling circulators, vacuum pumps, filtration equipment, rotary evaporators or distillation systems from UnionClay.
Can UnionClay support quotation and model matching?
Yes. Share target capacity, medium, temperature range, vacuum requirement, voltage and application details, and UnionClay will support model selection and quotation.